Roland VS-2400CD - Page 469

Supplemental Information
Roland VS-2400CD Owner’s Manual www.RolandUS.com 469
Busses
When importing earlier V-Studio songs into the VS-2400CD, busses are re-assigned as
follows.
EQ
When importing earlier V-Studio songs into the VS-2400CD, EQ parameters are re-
mapped as follows.
Effect Patches
This table notes the existence of certain VS-2400CD effect patches in earlier V-Studios.
* Speaker Modeling and the Mastering Tool Kit effects are available in the current VS-880EX and VS-1680
operating system versions. Visit www.rolandus.com or call Roland Product Support for more info.
Attenuator
When an earlier V-Studio’s song is imported, and when a VS-2400CD project is
exported, attenuator values are translated as follows.
VS-880: VS-880EX/890, VSR-880: VS-1680/1880: VS-2400CD
AUX A/B AUX1 L/R FX1 L/R AUX 1/2
FX1 A/B AUX2 L/R (FX1 L/R) FX2 L/R AUX 3/4
FX2 A/B AUX3 L/R (FX2 L/R) AUX1 L/R (FX3 L/R) AUX 5/6
— — AUX2 L/R (FX4 L/R) AUX 7/8
— — AUX3 L/R (AUX L/R) DIR 1/2
VS-880/880EX/890, VSR-880: VS-1680/1880: VS-2400CD:
EQL EQ Low Lo
EQM EQ Mid Lo-Mid
EQH EQ High Hi
VS-880: VS-880EX v. 1.x*
VS-1680 v. 1.x*:
VS-880EX/890/1680/1880,
VSR-890:
VS-2400CD:
— — OK Speaker Modeling
— — OK Mastering Tool Kit
— OK OK 3Band Isolator
— OK OK Tape Echo
— OK OK Analog Flanger
— OK OK Analog Phaser
Earlier V-Studio: VS-2400CD: Earlier V-Studio: VS-2400CD:
-42dB -42.0 to -39.1dB -12dB -15.0 to -9.1dB
-36dB -39.0 to -33.1dB -6dB -9.0 to -3.1dB
-30dB -33.0 to -27.1dB 0dB -3.0 to +2.9dB
-24dB -27.0 to -21.1dB +6dB +3.0 to +6.0dB
-18dB -21.0 to -15.1dB
VS2400OMUS.book 469 ページ ２００６年２月２８日 火曜日 午前１１時１２分