104 • X Mode SAM4S SPS-300 Series Electronic Cash Register AU
5. If IRC is SELECT, then the register selection displays:
6. Press the YES/NO key at each register # to select whether you wish to include each register
in the consolidated report. Press ENTER (CASH) after each selection. According to the IRC
Options in Service Mode, the report will print after the selection passes the maximum
machine number in the IRC network.
NOTE: When machine number selected (set to Y) within IRC Network does not present, the
report will not be printed and an error message “IRC NOT READY(#)” will show
on the display with beep. (# is the machine number of the machine not available)
X Report Options Table
Page Field Description
TYPE
Select X1 or X2 if available for the selected report.
OUTPUT
Select PRINT or DISPLAY output.
IRC
Select STANDALONE, ALL, or SELECT if available for
the selected report. If SELECT, the screen will prompt for
selection of registers - the screen will initially show the
registers available from the from/to IRC register
programming, for example if the IRC range is from 1 to 3,
then the selection will default to:
# 1Y 2Y 3Y 4N 5N 6N 7N 8N 9N
10Y 11N 12N 13N 14N 15N 16N
X REPORT OPTIONS
RPT# : FINANCIAL
1. TYPE : 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISPLAY 0
3. IRC 2
# 1Y
Å
2N 3N 4N 5N 6N 7N 8N 9N
10N 11N
To Next Page
Loading...
