SAM4S SPS-300 Series Electronic Cash Register AU Appendix • 281
System Options - Reference Information
Page Field Value Description
1 BEEPER ACTIVE
Y or N
Use to determine if buzzer is active when keyboard button is
pressed.
RESERVED
Y or N
CLERK ENTRY
0:PUSH
1:CODE
0 Select between PUSH or CODE for clerk entry (Sign-On).
When PUSH is selected, press CLERK button to Sign-On
(please see next option to determine which Clerk is used). If
select CODE, enter Clerk Code then press CLERK button.
See PROGRAM Mode Æ 6.CLERK for detail.
CLERK ASSIGNED WHEN
CLERK KEY IS PUSHED (1-
10)
1 If PUSH system is selected for Clerk Entry, you can select
the clerk that is signed on when the CLERK # key is
pressed. Note that the maximum clerk number you can enter
here is determined by how many clerks are allocated in
memory.
2 CLERK IS
Y:POP-UP
N:STAY-DOWN
Y or N
Depends on the size of the business, or reporting purpose,
the Clerk status can be set between Pop-Up or Stay-Down. If
Pop-up is chosen, a clerk will be signed-off automatically
after a transaction is finalised (stored in Account Operation).
Otherwise, Stay-Down will have a clerk stay sign-on all the
time (except after an Initial Clear is performed).
DRAWER NEEDS TO BE
SHUT TO OPERATE
Y or N Select between Y or N to allow or disallow operation when
drawer is open.
SYSTEM OPTION pg 25
ALLOW Z FINANCIAL REPORT WITH 0
Å
OPEN CLERK INTERRUPT
SYSTEM OPTION pg 24
MACRO KEY UNDER MGR
MACRO16 : N
Å
MACRO17 : N
MACRO18 : N
MACRO19 : N
MACRO20 : N
SYSTEM OPTION pg 23
MACRO KEY UNDER MGR
MACRO11 : N
Å
MACRO12 : N
MACRO13 : N
MACRO14 : N
MACRO15 : N
SYSTEM OPTION pg 22
MACRO KEY UNDER MGR
MACRO 6 : N
Å
MACRO 7 : N
MACRO 8 : N
MACRO 9 : N
MACRO10 : N
SYSTEM OPTION pg 21
MACRO KEY UNDER MGR
MACRO 1 : N
Å
MACRO 2 : N
MACRO 3 : N
MACRO 4 : N
MACRO 5 : N
To Next Page
Loading...
