SAM4S SPS-300 Series Electronic Cash Register AU Operating Instructions • 69
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the transaction
before the CANCEL key is pressed is automatically corrected. The CANCEL key can be
programmed to require manager control, or the key can be omitted or be inactivated through
programming, see "Function Key Programming" in the "Program Mode Programming" chapter.
NOTE: When a function is located on a function look up menu key, you access the function by
pressing the appropriate function look up key, then pressing the numeric digit corresponding
to the function you wish to select. On the default keyboard, the CANCEL function is
function #1 on the function look up 1 menu, so to use the CANCEL function, you would first
press FUNCTION LOOK#1, then press the numeric 1 key.
1. Register the items you wish to sell.
2. Press the CANCEL key
Receipt Example:
DATE 01/05/2012 TUE TIME 08:30
PLU1 T1 $2.29
PLU2 $1.29
CANCEL **************************
CLERK 1 No.000043 00001
Void Mode Operations
You can use the VOID Mode to correct any complete transaction. To correct any transaction:
1. Turn the control lock to the VOID.
2. Enter the transaction you wish to correct
exactly as it was entered originally in the
REG Mode. You can enter discounts,
voids, returns, tax exemptions or any
other function.
3. All totals and counters are corrected as if
the original transaction did not take
To Next Page
Loading...
