Sam4s SPS-300 - Group Programming

162 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
Group Programming
The main purpose of Group is to summarize PLU sales. There are up to 99 groups are available, the
exact number is determined in Memory Allocation. Group totals appear on reports, so that you can
track sales of different types of items. There are other features involved in Group Programming, such
as KP (Kitchen Printing), KV (Kitchen Video Ordering System), and Age Verification.
• The group descriptors programmed here will replace the default descriptors GROUP 1
through GROUP 99 that appear on reports.
• Each PLU can report totals to one, two or three different groups. If a PLU sends totals to
more than one group, the group total that appears on the Group report will not represent PLU
sales. Therefore, you also have the option of deciding whether each group's total will add to
the group total on the Group report.
• The KP programming only take effect when the group with KP programming is linked to the
first group of the Group Link in PLU Programming.
1. At the PGM control lock position menu, press 1 for GROUP. The GROUP
PROGRAMMING screen displays: (The maximum group number is set by memory
allocation.)
2. Enter the number of the group to be programmed, press ENTER (CASH). The GROUP#
PROGRAMMING. screen displays:
GROUP #1 PROGRAMMING
DESC : GROUP 1
Å
ADD TO GROUP TTL Y
SEND TO KP N
KP PORT# : 1 2 3 4 R
SAT. N N N N Y
SER. N N N N
PRINT RED ON KP N
GROUP PROGRAMMING
GROUP NO? (1-20) 0
Å