Sam4s SPS-300 - FINALISE (for Account Management)

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 241
FINALISE (for Account Management)
1. Press the FINALISE key to view the FINALISE function key options:
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
FINALISE Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is
FINALISE.
REQUIRE TO CLOSE
CHECK
Y or N Select Y, if want to activate partly payment, layby or bar
tab. Once activate, a check can be serviced/stored after a
payment is made. Press FINALISE key at the beginning of
the payment when the a Check / Account is about to be
closed. Once key is pressed, the Check / Account has to be
paid in full, then will be closed automatically.
FINALISE KEY PROGRAMMING
DESC : FINALISE
Å
REQUIRE TO CLOSE CHECK N