Sam4s SPS-300 - MACRO 1 ~ 10, 11 ~ 20 (Program Screen Added in Flashrom V1.011)

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 219
MACRO 1 ~ 10, 11 ~ 20
(Program Screen Added in FlashROM v1.011)
1. Press a MACRO key to view the MACRO function key options:
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
MACRO 1 ~ 10, 11 ~ 20 Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is
MACRO1 ~ MACRO20.
UNDER MGR CONTROL
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
NOTE: See Z / Report Reset Mode Æ 5.PLU LOOKUP PROGRAM for PLU LOOKUP PLU list
programming.
MACRO 1 PROGRAMMING
DESC : MACRO1
Å
UNDER MGR CONTROL N