Sam4s SPS-300 - PLU LOOKUP 1 ~ 15 (Program Screen Added in Flashrom V1.011)

242 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
PLU LOOKUP 1 ~ 15
(Program Screen Added in FlashROM v1.011)
1. Press a PLU LOOKUP key to view the PLU LOOKUP function key options:
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PRICE LEVEL 1 ~ 15 Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is PLU
LOOKUP1 ~ PLU LOOKUP15.
UNDER MGR CONTROL
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
PLU LOOKUP1 PROGRAMMING
DESC : PLU LOOKUP1
Å
UNDER MGR CONTROL N