Sam4s SPS-300 - Price Level 1 ~ 5 - Level 1 ~ 5

218 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
PRICE LEVEL 1 ~ 5 - LEVEL 1 ~ 5
1. Press the LEVEL key to view the PRICE LEVEL function key options:
NOTE: Option added at FlashROM v1.011.
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PRICE LEVEL 1 ~ 5 Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is
LEVEL 1 ~ LEVEL 5.
KEY DISABLE
Y or N Select Y to disable this function.
NOTE: Option added at FlashROM v1.011.
SEND DESCRIPTION TO KP
Y or N Select Y if you wish function key description to print on the
kitchen printer.
UNDER MGR CONTROL
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
SEND DESCRIPTION TO
RECEIPT
Y or N Select Y if you wish function key description to print on the
receipt printer.
NOTE: Option added at FlashROM v1.011.
SEND DESCRIPTION TO
CHECK
Y or N Select Y if you wish function key description to print on the
(guest) check.
NOTE: Option added at FlashROM v1.011.
LEVEL1 PROGRAMMING
DESC : LEVEL 1
Å
KEY DISABLE N
SEND DESCRIPTION TO KP N
UNDER MGR CONTROL N
SEND DESCRIPTION TO RECEIPT N
SEND DESCRIPTION TO CHECK N