Sam4s SPS-300 - Print Option Programming (for V01.011 and Later)

180 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
Print Option Programming (for v01.011 and later)
NOTE: If your SPS-300 is loaded with v01.010 or earlier version firmware, please see Appendix
for System Option Screen Images and Reference Information.
Refer to " Print Options - Reference Information " to make program entries or changes, press the
ENTER (CASH) key to finalize your change, then ESC (CLEAR) to exit. Default value has been
highlighted in bold print.
1. At the PGM control lock position menu, press 4 for PRINT OPTION Programming. The
SYSTEM OPTION pg 1 screen displays:
2. To browse through the options:
• Press ENTER key to move “Å” symbol option by option, or
• press PAGE UP or PAGE DOWN for fast browsing page by page.
3. When reaching the option you want to modify,
• For numeric programming options, enter the number through numeric pad,
• For Yes/No programming options, press YES/NO key to toggle between Y and N
PRINT OPTION pg 4
PRINT DATE Y
Å
PRINT TIME Y
PRINT MACHINE NO. Y
PRINT CLERK NAME Y
HOME CURRENCY SYMBOL IS $
P
RINT
Z
COUNTER Y
PRINT OPTION pg 3
PRINT PLU WITH ZERO TOTALS
ON REPORT N
Å
PRINT SUBTOTAL WHEN PRESSED
N
PRINT % OF SALES ON PLU REPORT
N
PRINT CONSECUTIVE NO. Y
PRINT OPTION pg 2
SKIP ZERO TOTALS ON
FINANCIAL REPORT Y
Å
SKIP ZERO TOTALS ON
CLERK REPORT Y
PRINT CLERK REPORT AFTER
FINANCIAL REPORT N
P
RINT SALE ITEM NO. N
PRINT OPTION pg 1
PRINT MEDIA TOTALS
ON CLERK REPORT N
Å
PRINT TAX SYMBOL Y
PRINT VOID MODE AND RETURN
ON REPORT Y
PRINT AUDACTION ON REPORT N
PRINT OPTION pg 1
PRINT MEDIA TOTALS
ON CLERK REPORT N
Å
PRINT TAX SYMBOL Y
PRINT VOID MODE AND RETURN
ON REPORT Y
PRINT AUDACTION ON REPORT N