Sam4s SPS-300 - MIX & Match Name

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 251
Mix & Match Name
The Mix & Match Message is a programming message of up to 99 lines of 12 characters.
1. From the LOGO DESCRIPTOR PROGRAM screen, press 5 to display the Mix & Match
Desc. Screen:
2. Using the alpha numeric keyboard overlay, type the descriptor. You can also program by
using the descriptor code method. Each descriptor can be up to 12 characters. If you make a
mistake, press the BACKSPACE key to erase the previous character. After you have
completed typing the first descriptor, press ENTER (CASH) to accept the new message and
advance to the second line, or press ESC (CLEAR) to return to the LOGO DESCRIPTOR
PROGRAM screen without making any changes.
3. Press ENTER (CASH) repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next descriptor you wish to program. Using the same procedure, continue programming each
line as necessary. Press ESC (CLEAR) at any time to exit and return to the LOGO
DESCRIPTOR PROGRAM screen.
MIX & MATCH DESC.
È
M & M 1 :
M & M 1
Å
M & M 2 :
M & M 2
M & M 3 :
M & M 3