224 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
PREVIOUS BALANCE - PBAL
1. Press the PBAL key to view the PREVIOUS BALANCE function key options:
NOTE: Option added at FlashROM v1.011.
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PREVIOUS BALANCE Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is
PBAL.
ENTER ANY TIME
Y or N Select Y to allow the PBAL entry at any time. Select N to
allow a PBAL entry only at the start of a sale.
REQUIRE AT START OF
SALE
Y or N Select Y to require an entry into the PBAL key at the start of
every transaction.
PRINT ON CHECK (SOFT &
HARD)
Y or N
NOTE: Option added at FlashROM v1.011.
PREVIOUS BALANCE PROGRAMMING
DESC : PBAL
Å
ENTER ANY TIME N
REQUIRE AT START OF SALE N
PRINT ON CHECK (SOFT & HARD) N
To Next Page
Loading...
