SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 149
Program Mode Programming
Default Programming
• The first 300 (1 ~ 300) PLUs have been pre-programmed in default program, including all
keyboard PLUs. They are preset to Taxable by GST (Tax1), Preset Price and
Overridable on Preset Price.
• All programming (unless otherwise noted) is done with the control lock in the PGM-Mode.
Each section details a specific area of register programming.
• The default Tax program is set to 10.000% VAT on Tax 1 and the description is set to
GST already.
Descriptor Programming Methods
Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages. There
are two methods available to program descriptors, the Program Overlay Method and the Descriptor
Code Method. Program Overlay Method is the default programming method.
Program Overlay Method
The Alpha Overlay layout for each model is shown below. During descriptor programming, the
keyboard button function changes to this layout.
When the descriptor field is selected on the program screen, you can simply type the descriptor. Press
ENTER (CASH) to finalize your descriptor.
To Next Page
Loading...
