Sam4s SPS-300 - Function Look up(Flu) #1 ~ 2 - Funclk1 ~ 2

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 215
FUNCTION LOOK UP(FLU) #1 ~ 2 - FUNCLK1 ~ 2
Two function keys (FUNCTION LOOK 1and FUNCTION LOOK 2) are available to access up to
eight functions each. You can use function look up keys to locate functions that are necessary for
your application, but may not fit on the keyboard layout, or to locate functions that are used only
occasionally.
With this program, you can determine which functions are located on each function look up key, and
you can also access these functions for option programming.
Press the FUNCTION LOOK UP 1 or FUNCTION LOOK UP 2 key to view the appropriate
function program menu screen:
To Assign Different Function key into Function Lookup
1. Press 0 to select the menu assignment on the function look-up key, the FUNC. # MENU
ASSIGN screen displays:
2. Enter the number of the menu position (there are eight functions listed on each function
look up menu) that you wish to edit, press ENTER (CASH).
3. Type the code for the function you wish to place on the function look up key menu, press
ENTER (CASH). See Function Key Code Table in S-Mode, Function Key
Assignment or press PAGE DOWN to view a list of functions and codes.
4. Go to step 1 above and continue to program menu numbers for the function look up key,
or press ESC (CLEAR) to return to the PROGRAM MODE menu.
FUNC #1 PROGRAM
È
0.MENU ASSIGNMENT
1.STATUS PROGRAM
FUNC #1 MENU ASSIGN.
MENU NUMBER : 1

CURRENT ASSIGNMENT
CANCEL
ENTER NEW FUNC. CODE,
PRESS CASH
0
Å
FUNC #1 MENU ASSIGN.
PUSH MENU NUMBER TO
BE PROGRAMMED (1-8)
0
Å