Sam4s SPS-300 - Not Found PLU Report

110 • X Mode SAM4S SPS-300 Series Electronic Cash Register AU
Not Found PLU Report
A Not Found PLU Report is available to print out up to 50 newly programmed PLUs which are
programmed through item registration procedure. You can print out this report if you wish to
complete programming for those PLUs. PLU# will print first then followed by PLU name.
1. On X (Manager) Mode screen (either the first page or the second page, press 8, then the Not
Found PLU Report will print.
or
MANAGER MODE Ç
7.E.J. OPERATION
8.NOT FOUND PLU
MANAGER MODE
È
0.MANAGER OPERATION
1.X REPORTS
2.DECLARATION
3.REG. PRINT FORMAT
4.STOP RECEIPT PRINTING
5.STOP JOURNAL PRINTING
6.TRAIN MODE