234 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
TARE
1. Press the TARE key to view the TARE function key options:
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
TARE Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptor is
TARE.
KEY DISABLE
Y or N Select Y to disable this function.
UNDER MGR CONTROL
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
#5 IS MANUAL TARE Y or N Choose Y to use tare number five to manually enter a tare
weight.
TARE KEY PROGRAMMING
DESC : TARE
Å
KEY DISABLE N
UNDER MGR CONTROL N
#5 IS MANUAL TARE N
To Next Page
Loading...
