Sam4s SPS-300 - Memory Allocation

SAM4S SPS-300 Series Electronic Cash Register AU Service Mode Programming • 131
Memory Allocation
NOTE: You must step through every memory allocation field to implement new memory allocation.
If you press CLEAR, at any field you will abort memory allocation processes without
making changes. Changing this has important consequences. Please consult your dealer.
1. At the SM control lock position menu, press 5 for Memory Allocation programming. The
MEMORY ALLOCATION screen displays:
Press PAGE DOWN to view the remainder of the MEMORY ALLOCATION options:
2. The total available memory is displayed on the first line of the screen (TTL AVAIL). The
total memory currently allocated is displayed on the second line of the screen (TTL USED).
The TTL USED field is updated when you complete a change and press ENTER (CASH) on
each option.
Starting at the PLUs field, enter the quantity of each memory variable. Press ENTER
(CASH) after each entry, and the cursor will move to the next variable. Page 2 of Memory
Allocation will display after the # OF GROUP TOTALS field is set:
3. Continue filling each variable until complete. Press ENTER (CASH) after setting the last
field, "# LINES/SFT CHK". The screen will display "ARE YOU SURE ?". N (No) will
display as the default answer to the question. If you wish to implement the new allocation you
have entered, press the YES/NO key, then press ENTER (CASH)
4. The message "PLEASE WAIT . . . . " displays when successful. The display will remain in
Memory Allocation screen, with “MEMORY ALLOCATION SIZE OVER” docket printed,
followed by “INVALID ENTRY” on the display with beep! if you attempt to allocate
features requiring more memory than is available.
5. The SERVICE MODE menu screen displays when memory allocation programming is
completed.
MEMORY ALLOCATION.
TTL AVAIL : 1855488
TTL USED : 318867
# EJ LINES 1000
Å
# CHECKS 10
Y=HARD/N=SOFT CHK N
# LINES/SFT CHK 50
MEMORY ALLOCATION.
TTL AVAIL : 1855488
TTL USED : 318867
# PLUS 2000
Å
# LEVELS (1-5) 1
# CLERKS 10
# GROUP TOTALS 20