Sam4s SPS-300 - Group Programming - Reference Information

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 163
3. To browse through the options:
• Press ENTER key to move “Å” symbol option by option, or
• press PAGE UP or PAGE DOWN for fast browsing page by page.
4. When reaching the option you want to modify:
• For descriptor programming options, the keyboard will change to Program Overlay,
enter the character you need up to 12 characters. Or enter Descriptor Code to make up the
description you want.
NOTE: System Option is default to Program Overlay. Please check setting on page 17
• For numeric programming options, enter the number through numeric pad,
• For Yes/No programming options, press YES/NO key to toggle between Y and N
5. Refer to the table below to fill the fields of the GROUP PROGRAMMING screens.
6. Press ENTER (CASH) to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press ESC (CLEAR) to return to the PROGRAM MODE
screen.
Group Programming - Reference Information
Page Field Value Description
1 DESC
Alpha
numeric 12
character
You can program a descriptor for each group. Type the
descriptor using the Program Overlay. The overlay is
automatically activated when the cursor is pointing at the
DESC field. The default descriptors are GROUP 1,
GROUP 2, etc.
ADD TO GROUP TOTAL
Y or N
Use this to determine if the sales total of this group is going
to be added into Group Total which will update the total of
Group Report.
SEND TO KP
Y or N
In a café or restaurant environment, use this to determine if
the items linked to this group print to a remote printer as a
Kitchen Printer.
NOTE: Even set this option to Y, it will not work unless this
group is the first group that a PLU is linked to.
GROUP #1 PROGRAMMING
SEND TO KV N
Å
KV GROUP#(0-16) 0
KV COLOR(0-16) 0
AGE VERIFICATION (0-5) 0