Sam4s SPS-300 - Page 176

164 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
Page Field Value Description
KP PORT #
(SAT.) 1, 2, 3, 4, R
(SER.) 1, 2, 3, 4
Y for R or
N for 1, 2,
3 and 4 on
both SAT.
and SER.
When Send to KP is Y, a Kitchen Printer (include Kitchen
Requisition) need to be assigned. When a KP is going to be
printed through an individual register, the SAT port(s) is
selected. More than one ticket may be printed depends on the
settings. When in a IRC network and share Printing is
preferred, the SER port(s) can be assigned as well.
* SAT. : SATELLITE (Local)
* SER. : SERVER
R : Internal Receipt Printer (Kitchen Requisition)
See Service Mode Æ 7.IRC OPTIONS for IRC settings
detail; Æ 8.RS232C PORTS for RP settings detail.
PRINT RED ON KP
Y or N When print to KP, with a printer that capable to print 2
colors, you can set this option to Y to print item on KP as
RED (or the second color). If a thermal printer is used, the
thermal printer will print Inverse instead.
NOTE: This option does not apply to the register receipt
printer.
2 SEND TO KV
Y or N
In a cafe or restaurant environment, a Kitchen Video system
may be installed. Use this to determine if send item info to
KV.
KV GROUP# (1 - 16)
0
Select the kitchen video group to which PLUs in this group
are to be sent. Enter 0 if not using it.
KV COLOR (1 - 16)
0
The color code set here will control the color or screen
format displayed on an optional kitchen video system
requisition screen. Color codes vary by KVS system. Refer
to the documentation for your video system for specific
information. Enter 0 for not using it.
AGE VERIFICATION (1 - 5)
0 A group can be set as age restricted. All items with similar
rule can link to this group. This option allows to link a group
to 1 of the 5 Age Verification programmed in Z Mode.
When an item in this group is registered (first time in a
transaction only), the register will prompt the operator to
enter the customer’s date of birth. The sale of the item will
be registered only if the customer has reached the
appropriate age. Set to 0for no age requirement. Set 1 to 5 to
check the date of birth against the age requirement group set
in Z Mode. Enter 0 for not using it.