Sam4s SPS-300 - Copy the Images to an SD Card; Load the Images to the Register

SAM4S SPS-300 Series Electronic Cash Register AU Service Mode Programming • 143
3. Copy the Images to an SD Card
The PC Utility will create two image files:
• USERPRE.IMG
• USERPOST.IMG
They will be located in your PC at:
C:\SPS-300PC\<Store Name>
Copy the images to the following path on your SD card:
SD\\SPS300\PgmBack\<Store Name>
Important: In the path: C:\SPS-300PC\<Store Name>, the store name is the name you have
defined as the store in the PC Utility.
NOTE: You must use the same store name in the SPS-300 Series ECR at System Option.
4. Load the Images to the Register
via SD Card Operation
Please refer to S-Mode, SD Card Operation for detail.
via PC Utility
1. At the PC Utility, choose PreAmble Image or PostAmble Image from the
DownProgram(PC->ECR) menu.
2. Cash Register should enter PC Online Mode and download procedure should start.
3. When complete, press OK to exit from download process.