Sam4s SPS-300 - Paid out 1 ~ 3 - Po1 ~ 3

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 225
PAID OUT 1 ~ 3 - PO1 ~ 3
1. Press one of the PAID OUT keys to view the PAID OUT function key options:
2. Press ENTER (CASH) from the last field to return to the FUNCTION KEY PROGRAM
screen, or press ESC (CLEAR) key at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PAID OUT 1 ~ 3 Key Function Options
Page Field Value Description
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptors are
PO 1 ~ PO 3.
HALO
7 digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
KEY DISABLE
Y or N Select Y to disable this function.
UNDER MGR CONTROL
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
COMPULSORY
VALIDATION
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
PO #1 KEY PROGRAMMING
DESC : PO1
Å
KEY HALO 0.00
(0 : NO LIMIT)
KEY DISABLE N
UNDER MGR CONTROL N
COMPULSORY VALID N