Sam4s SPS-300 - Service and Program Mode Programming; Service Mode Programming

SAM4S SPS-300 Series Electronic Cash Register AU Service Mode Programming • 119
Service Mode Programming
Overview
The Service Mode Programming requires careful reading. You may want to contact your dealer for
assistance. The following procedures are available in the Service Mode Programming.
• Memory All Clear (Clear All Memory back to factory default)
• Hardware Tests
• Clear all totals
• Clear grand total
• Clear/Delete PLU file
• EPROM Information
• Memory Allocation
• Assignment of functions to keyboard locations
• IRC (Inter Registers Communication) Options
• RS232C Port 1, 2, 3 & 4 Options.
• SD Card Operations
• PC Utility Operations