SAM4S SPS-300 Series Electronic Cash Register AU Z Mode • 113
5. If IRC is SELECT, then the register selection displays:
6. Press the YES/NO key at each register # to select whether you wish to include each register
in the consolidated report. Press ENTER (CASH) after each selection. According to the IRC
Options in Service Mode, the report will print after the selection passes the maximum
machine number in the IRC network.
Z Report Options Table
Page Field Description
TYPE
Select Z1 or Z2 if available for the selected report.
OUTPUT
Select PRINT output.
IRC
Select STANDALONE, ALL, or SELECT if available for the selected
report. If SELECT, the screen will prompt for selection of registers - the
screen will initially show the registers available from the from/to IRC
register programming, for example if the IRC range is from 1 to 3, then the
selection will default to:
# 1Y 2Y 3Y 4N 5N 6N 7N 8N 9N
10Y 11N 12N 13N 14N 15N 16N
Z REPORT OPTIONS
RPT# : FINANCIAL
1. TYPE : 0
0:DAILY 1:PERIOD
2. 0:PRINT 0
3. IRC 2
# 1Y
Å
2N 3N 4N 5N 6N 7N 8N 9N
To Next Page
Loading...
