Sam4s SPS-300 - Currency Conversion

82 • Operating Instructions SAM4S SPS-300 Series Electronic Cash Register AU
Currency Conversion
If you normally accept currency from neighboring nations, you can program to convert the subtotal of
a sale to the equivalent cost in the foreign currency. You can set up four separate conversion
functions for different foreign currencies. To do this, you need to program the conversion factor. For
example, if the US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency), the
conversion factor is 1.3720. See "Function Key Programming" in the "Program Mode Programming"
chapter to set a conversion factor.
NOTE: When a function is located on a function look up menu key, you access the function by
pressing the appropriate function look up key, then pressing the numeric digit corresponding
to the function you wish to select. On the default keyboard, the CONV1 function is function
#7 on the function look up 1 menu, so to use the CONV1 function, you would first press
FUNCTION LOOK#1, then press the numeric 7 key.
1. Register the items you wish to sell.
2. Press the CONV1 key if it is located on
the keyboard:
or, if the charge function is located on a
function look up key press
FUNCTION LOOK1, then press the
digit representing the charge function
you are using:
3. The amount due in foreign currency is
displayed.
4. Enter the amount of the foreign currency
tender, Press CASH:
5. The display will indicate the amount of
foreign currency tendered and display
$5.17 change due. The change due is
computed in home currency!
Receipt Example:
DATE 01/05/2012 TUE TIME 08:30
PLU1 T1 $2.00
TOTAL $2.12
CONV 1 ¥2.90
CHANGE RATE @1.3720
HOME AMT. $10.00
CHANGE $5.17
GST $0.12
CLERK 1 No.000060 00001
FUNCTION
LOOK#1
7
CONV1
1 0 CASH 0
0
The currency symbol you
program will display here. See
"Print Option Programming" in
the "Program Mode
Programming" chapter.