Sam4s SPS-300 - Training Mode

108 • X Mode SAM4S SPS-300 Series Electronic Cash Register AU
Training Mode
A training mode is available so that the register can be operated, to practice registrations, without
updating totals and s. If you choose to use training mode, you must set a training mode password (see
"Program Mode Æ Training Mode Password").
NOTE: If you make registrations to check tracking numbers in training mode, remember that the
check tracking total will be updated. Remember to pay, or clear any check tracking
registrations before resuming normal operations.
1. From the MANAGER MODE menu press 6 to enter or exit training mode:
2. The ENTER/EXIT TRAINING screen displays. The screen will display the current status.
To enter training mode, type your four digit password (you must enter preceding zeros) and
press ENTER (CASH). To exit training mode, type 0000 and press ENTER (CASH).
Æ
NOTE: If you forget your password, please contact your dealer.
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
IN TRAINING
TO EXIT TRAINING,
ENTER ‘0000’
AND PRESS CASH
****
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
IN TRAINING
TO EXIT TRAINING,
ENTER ‘0000’
AND PRESS CASH
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
NOT IN TRAINING
TO ENTER TRAINING,
ENTER 4 DIGIT PASSWD
AND PRESS CASH
*
***
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
NOT IN TRAINING
TO ENTER TRAINING,
ENTER 4 DIGIT PASSWD
AND PRESS CASH