244 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
Preamble
The preamble is a programming message of up to six lines of 32 single space characters that appears
at the top of each receipt and/or guest check.
1. From the LOGO DESCRIPTOR PROGRAM screen, press 0 to display the PREAMBLE
screen:
2. Using the alpha numeric keyboard overlay, type the first line of the message. Each line can be
up to 32 single space characters. If you make a mistake, press the BACKSPACE key to erase
the previous character. After you have completed typing the first line, press ENTER (CASH)
to accept the new line and advance to the second line, or press ESC (CLEAR) to return to the
LOGO DESCRIPTOR PROGRAM screen without making any changes.
3. Using the same procedure, continue programming each line as necessary. Press ESC
(CLEAR) at any time to exit. After programming the third line, the fourth, fifth, and sixth
lines display:
4. When the last line has been entered, press ENTER (CASH) to accept the line and return to
the LOGO DESCRIPTOR PROGRAM screen.
PREAMBLE
Ç
LINE 4 :
Å
LINE 5 :
LINE 6 :
PREAMBLE
To Next Page
Loading...
