Sam4s SPS-300 - Clerk Programming - Reference Information

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 189
Clerk Programming - Reference Information
Page Field Value Description
NAME
Alpha
numeric up
to 12
character
You can program a descriptor for each clerk. The name you
program will print on the receipt in place of the default
CLERK #1-99. Type the descriptor using the Program
Overlay. The overlay is automatically activated when the
cursor is pointing at the DESC field.
PASSWORD
Up to 9
digit
number
If you are using the code entry clerk system, the number you
set here is the number you must use to sign on or clock
in/out. This field - depends on the setting in the System
Option - can be used for MCR Card number (first 9 digit) or
Dallas Key Code. When both turned on, MCR Code has
higher priority.
DRAWER (0 - 2)
1
Enter 0 to allow check track operations only. (No cash sales.)
Enter 1 or 2 (with the multiple drawer option) to select which
drawer the clerk will open.