Sam4s SPS-300 - SD Card Operation Table

140 • Service Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
1. At the SM control lock position menu, press 9 and then select menu for SD Card operation.
The appropriate SD CARD Operation screen displays:
SD Card Operation Table
Page Field Description
Program Backup
Save Program File to SD card
Program Load
Load Program File to SPS-300
Report Backup
Save Report File to SD card
Pre-Image Logo Load
Load Preamble Image File to SPS-300
Pre-Image Logo Backup
Save Preamble Image File to SD card
Post-Image Logo Load
Load Postamble Image File to SPS-300
Post-Image Logo Backup
Save Postamble Image File to SD card
SD CARD OPERATION
1. PROGRAM BACKUP
2. PROGRAM LOAD
3. REPORT BACKUP
4. PRE-IMAGE LOGO LOAD
5. PRE-IMAGE LOGO BACKUP
6. POST-IMAGE LOGO LOAD
7. POST
-
I
MAGE LOGO BACKUP