Sam4s SPS-300 - Tendering a Charge (EFTPOS) Sale; Cash out Within a Charge (EFTPOS) Sale

78 • Operating Instructions SAM4S SPS-300 Series Electronic Cash Register AU
Tendering a Charge (EFTPOS) Sale
Tendering a charge sale may or may not be allowed. See "Function Key Programming" in the
"Program Mode Programming" chapter to set tendering options for the charge keys, i.e. whether to
allow over tendering or to enforce tendering.
1. Register the items you wish to sell.
2. Enter the amount of the charge and press
one of the charge keys if it is located on
the keyboard:
or, if the charge function is located on a
function look up key, enter the amount of
the charge:
Press FUNCTION LOOK2, then press
the digit representing the charge function
you are using:
Receipt Example:
DATE 01/05/2012 TUE TIME 08:30
PLU1 T1 $2.99
PLU1 T1 $2.99
4______________@ $ 1.99
PLU2 $7.96
TOTAL $13.94
CHARGE1 $20.00
CHANGE $6.06
GST $0.54
CLERK 1 No.000055 00001
Cash Out within a Charge (EFTPOS) Sale
CASH OUT within a charge (EFTPOS) sale may or may not be allowed. See "Function Key
Assignment Programming" in the "Service Mode Programming" chapter to assign CASH OUT
key.
1. Register the items you wish to sell.
2. Enter the amount of cash for cash out
then press CASH OUT key.
3. Press EFTPOS key.
Press FUNCTION LOOK2, then press
the digit representing the charge function
you are using:
Receipt Example:
DATE 01/05/2012 TUE TIME 08:30
PLU1 T1 $2.99
PLU1 T1 $2.99
4______________@ $ 1.99
PLU2 $7.96
TOTAL $13.94
CASH OUT $20.00
EFTPOS $33.94
CHANGE $20.00
GST $0.54
CLERK 1 No.000056 00001
FUNCTION
LOOK#2
1
EFTPOS
0 0 0 2 CASH OUT
FUNCTION
LOOK#2
1
0 0 0 2
CHARGE
1
0 0 0 2