Sam4s SPS-300 - Programming an Add-On Tax Rate Percentage

SAM4S SPS-300 Series Electronic Cash Register AU Program Mode Programming • 167
Programming an Add-On Tax Rate Percentage
When tax requirements can be met using a straight percentage rate, use the following method to
program a tax as a straight percentage.
1. Turn the control lock to the PGM position.
2. From the PROGRAM MODE menu, press 2 to view the TAX PROGRAMMING screen.
3. When the arrow is pointed at the TAX NUMBER field, enter the number of the tax you wish
to program. (There are four taxes available, enter 1, 2, 3, or 4.) Tax 2 is used for example.
4. When reaching the option you want to modify,
• For descriptor programming options, the keyboard will change to Program Overlay,
enter the character you need up to 18 characters. Or enter Descriptor Code to make up the
description you want.
NOTE: System Option is default to Program Overlay. Please check setting on page 17
• For numeric programming options, enter the number through numeric pad,
5. Enter 0 then press ENTER (CASH) at TAX TYPE (0-2) field for an ADD-ON tax with a
straight percentage rate. The appropriate TAX # PROGRAMMING screen displays:
6. When the arrow is pointed at the TAX RATE field, enter the percentage rate for the sales tax.
For example if the tax is 6 percent, enter 6.000 or 6.0. If the tax is 7.5 percent, enter 7.500 or
7.5 using the decimal key. If the tax is 10 percent, enter 10.000 or 10.0. Press ENTER
(CASH) to set the rate.
7. The TAX PROGRAMMING screen will prompt you to enter the next tax. If necessary,
continue to program additional taxes, or press ESC (CLEAR) to return to the PROGRAM
MODE screen.
TAX #2 PROGRAMMING
TAX RATE 0.000
Å
TAX PROGRAMMING
TAX NUMBER (1-4) 2
Å
DESC : TAX2
TAX TYPE (0-2) 0
0 : ADD-ON
1 : TAX TABLE
2 : VAT