Sam4s SPS-300 - Program Mode Programming

SAM4S SPS-300 Series Electronic Cash Register AU Service Mode Programming • 137
6. Press PAGE DOWN to view page 4 of the RS232C port program:
7. Press PAGE DOWN to view page 5 of the RS232C port program:
8. Press PAGE DOWN to view page 6 of the RS232C port program:
9. Press PAGE DOWN to view page 7 of the RS232C port program:
10. Press PAGE DOWN to view page 8 of the RS232C port program:
11. Refer to "RS232C Settings Screen Program Notes" on the next page to fill the fields for each
port.
12. Press the CLEAR key to finalize and return to the SERVICE MODE screen.
PORT 1 PROGRAM pg8
POLE DISPLAY TYPE 0
Å
0:EPSON 1:CITIZEN
EFT TYPE 0
0:NONE 1:INGENICO
2:TYRP EFTPOS 3:NZINGENICO
RESERVED
PORT 1 PROGRAM pg7
PRINTER TYPE 0
Å
14:STAR SP-200
15:STAR SP-298
16:STAR SP-300
17:STAR TSP-200
PORT 1 PROGRAM pg6
PRINTER TYPE 0
Å
8:EPSON TM-T88-2
9:EPSON U200
10:EPSON U295
11:EPSON U300
12:EPSON U325
13:EPSON U375
PORT 1 PROGRAM pg5
PRINTER TYPE 0
Å
2:SAM4S ELLIX 20II
3:SAM SRP-250
4:SAM SRP-350
5:CITIZEN 3550/3551
6:CITIZEN 810
7:CITIZEN 230
PORT 1 PROGRAM pg4
PRINT LINE ON GUEST CHECK
(0-50) 0
Å
SCALE TYPE 0
0:NCI 1:CAS
PRINTER TYPE 0
0:NONE
1:SAM4S ELLIX 10