Sam4s SPS-300 - Page 204

192 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
NON ADD # / NO SALE Key Function Options
Page Field Value Description
1
DESC1
Alpha
numeric up
to 12
character
You can program a descriptor for the no sale function. The
default descriptor is NOSALE.
DESC2
Alpha
numeric up
to 12
character
You can program a descriptor for the non add # function.
The default descriptor is NON ADD #.
KEY DISABLE
Y or N Select Y to disable this function.
UNDER MGR CONTROL
Y or N Select Y to allow operation only in manager operation mode.
INHIBIT NO SALE AFTER
NON-ADD #
Y or N Select Y if you want disable the NO SALE function after a
non-add number is entered.
PRINT NON-ADD# ON
HARD CHECK
Y or N
2
ENFORCE # ENTRY AT
START OF SALE
Y or N Select Y if you wish to enforce the entry of a non-add
number at the beginning of each transaction. (For example,
to track the number of customers in each sale, or to identify a
customer number with each sale.)
PRINT ON N/S
Y or N Select N to stop printing when a NO SALE is performed.
NON-ADD # PROHIBIT
Y or N Select Y to disable the non-add # function.
COMP NON-ADD # MUST
MATCH MAX DIGIT
Y or N Select Y if you wish all non-add number entries to have the
exact number of digits selected in the MAX DIGIT flag
below.
MAX DIGIT (0-8)
0
Enter the maximum number of digits for non-add number
entry. Zero (0) means no limit.