Sam4s SPS-300 - Page 214

202 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
CHARGE 1 ~ 8 Key Function Options
Page Field Value Description
1
DESC
Alpha
numeric up
to 12
character
You can program a descriptor. The default descriptors are
CHARGE1 ~ CHARGE8.
HALO
7 digit
amount
You can limit errors by setting the maximum amount that can
be tendered. "0" means that there is no entry limit.
AMOUNT TEND COMP.
Y or N Select Y if you want to force the operator to enter the
tendered amount and let the register calculate the change.
OVER/UNDER TENDER IN
MGR CONTROL
Y or N Select Y if you do not want the operator to tender more than
the amount of the sale and issue change. When selected, over
tendering is allowed only in the X control lock position.
DISABLE UNDER TEND.
Y or N Select Y if you do not want the operator to tender less than
the amount of the sale.
2
DOES DRAWER OPEN
Y or N Select N if you do not want the drawer to opened with this
key.
ALLOW OVER TEND.
Y or N Select Y if you wish to allow tender greater than the amount
of the sale.
NON-ADD # COMP.
Y or N Select Y if you wish to enforce the entry of a non-add
number prior to tendering.
EXEMPT TAX 1
Y or N Select Y to exempt the appropriate tax automatically when
finalized with this key.
EXEMPT TAX 2
Y or N
EXEMPT TAX 3
Y or N
EXEMPT TAX 4
Y or N
3
COMPULSORY
VALIDATION
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
SEND TO EFT
Y or N Set to Y if connected to a Lan Tran credit authorization
terminal.
EFT OUTPUT COM PORT#
(0-4)
0
Select the port (1,2,3 or 4) where the EFT is attached.