Sam4s SPS-300 - Page 41

SAM4S SPS-300 Series Electronic Cash Register AU Operating Instructions • 29
KEY Description
LEVEL 1 - 5
(PRICE LEVEL)
PRICE LEVEL keys shift the price PLU that is being registered. Levels can be stay
down ; pop-up after each item to register, for example large, medium or small soft
drink; pop-up after each transaction to register, for example, toppings of various
pizza sizes or member/non-member pricing. Depends on setting in MEMORY
ALLOCATION, there are up to 5 Levels.
PRINT CHK
(PRINT CHECK)
Use PRINT CHK (Print Check) key to print a guest check (soft check). The check
can be printed on an optional (RS-232C) printer, or can be printed on the receipt
printer. The PRINT CHECK key can be set to automatically service the check.
PROMO
The PROMO key allows you to account for promotional items, as in "buy two, get
one free". Pressing this key will remove an item's cost from the sale, but will include
the sale of the item in the item's sales counter.
RA 1 - 3
(RECD ON
ACCOUNT)
The RA (Received on Account) key is used to record media loaned to the cash
drawer, or payments received outside of a sale. The cash drawer will open. The
amount received, depending on tendered method, will add to its total. The RA
operations are allowed outside of a sale only.
SUBTOTAL
Use SUBTOTAL key to display subtotal of sale including tax. Must be pressed prior to
a sale discount or sale surcharge.
SCALE
Use SCALE key to make weight entries. When a scale is attached, press the scale
key to show the weight in the display, then press (or enter) a PLU to multiply the
weight times the price. When a scale is not attached, you can enter the weight (using
the decimal key for fractions). PLUs may be programmed to require an entry
through the scale key.
SERVICE
(New Balance)
Use SERVICE key to temporarily finalise Previous Balance or check tracking
transactions.
TABLE
Use TABLE key to enter a table number. You can enforce the entry of a table
number for guest check transactions, or for all transactions. If you are tracking guest
check balances, the balance can be recalled either by entering the check number or
the table number.
TARE
Tares are container weights. If you are using the scale function, you can preset up to
5 different tare weights. The tare can be subtracted automatically when a specific
PLU is registered, or manually inputting the tare number and pressing the TARE key
can subtract the tare. Tare #5 can be programmed for entering tare weights manually.
TAXEXMT
(TAX EXEMPT)
Press the TAXEXMT (Tax Exempt) key to exempt tax 1, tax 2, tax 3, and/or tax 4
from the entire sale.
TAX 1 - 4
(TAX SHIFT)
Press to reverse the programmed tax status of a PLU. For example, by pressing the
appropriate TAX SHIFT key prior to registering a taxable item, the item will be
sold without sales tax added.
TIME IN/OUT
Use to track hours worked by an employee, as would be done by a time clock.