Samsung S3F84B8 - Relative Address (RA) Mode

S3F84B8_UM_REV 1.00 3 ADDRESSING MODES
3-13
3.13 RELATIVE ADDRESS (RA) MODE
In Relative Address (RA) mode, a two’s complement signed displacement between - 128 and + 127 is specified in
the instruction. The displacement value is then added to the current PC value. Its result is the address of next
instruction to be executed. Before this addition occurs, the PC contains the address of instruction immediately
following the current instruction.
Several program control instructions use the Relative Address mode to perform conditional jumps. The
instructions that support RA addressing are BTJRF, BTJRT, DJNZ, CPIJE, CPIJNE, and JR.
OPCODE
Program Memory
Displacement
Program Memory
Address Used
Sample Instructions:
JR ULT,$+OFFSET ; Where OFFSET is a value in the range +127 to -128
Next OPCODE
+
Signed
Displacement Value
Current Instruction
Current
PC Value
Figure 3-13 Relative Addressing