SATO HR2 Series - Page 157

Section 8: Appendix
HR2 Series Operator Manual Page 8-9
8.5 PAPER END (Cont’d)
Notes:
1. Label sensor detects the status of “no paper” for 15mm (0.6") of paper feed.
2. If the printing step between print head and label sensor (75.88mm, 2.9") is 15mm (0.6") or less, the printer
will indicate “Paper end” error after (1) has been printed.
If the label pitch size between print head and label sensor (75.88mm, 2.9") is 15mm (0.6") or more, the
printer will indicate “paper end” error soon after “paper end” is detected. Release the error to resume
printing.
(2)
(1)
Label sensor
Feed direction
(1)
Print head
Label sensor
Feed direction

Print head
75.88mm
(
2.9"
)
75.88mm
(
2.9"
)
P
rinting step between print head and label sensor: 75.88mm (2.9")-15mm (0.6") or less
P
rinting step between print head and label sensor: 75.88mm (2.9")-15mm (0.6") or more