Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-3
3.1 OPERATOR PANEL (Cont’d)
• LCD Display
Up to five icons and two lines of alphanumeric text can appear on the LCD display to indicate the current
printer status.
The same area can also display two lines of alphanumeric text during various setting modes.
List of Icons
[Mode display]
[Mode selection screen]
No Icon Description
1 Displayed when printer is in online state
2 Displayed when printer is in offline state
3 Displayed when printer is in Test Print Mode and HEX Dump Print Mode
4 Displayed when printer is in SEMBL Mode
5 Displayed when printer is in Download Mode
6 Displayed when Keypad is connected to printer
7 Displayed when printer is in Upload Mode
No Icon Description
1 Changing to Normal Mode
2 Changing to User Mode
3 Changing to Interface Mode
4 Changing to Cartridge Mode (Memory Card Mode)
5 Changing to SEMBL Mode
6 Changing to Advanced Mode
7 Changing to HEX Dump Print Mode
To Next Page
Loading...
