Schweitzer Engineering Laboratories SEL-787 - Page 269

Date _______________
Group______________
Date Code 20081022 Instruction Manual SEL-787 Relay
SET.57
of 68
SEL-787 Settings Sheets
DNP3 Map Settings (SET DNP n Command)
DNP3 Map Settings (SET DNP n Command)
Use SET DNP n command with n = 1, 2, or 3 to create up to three DNP User Maps. Refer to Appendix D:
DNP3 Communications for details.
This is DNP Map 1 (DNP Map 2 and DNP Map 3 tables are identical to DNP Map 1 table).
Binary Input Map
DNP Binary Input Label Name (10 characters) BI_00 :=
DNP Binary Input Label Name (10 characters)
BI_01 :=
DNP Binary Input Label Name (10 characters)
BI_02 :=
DNP Binary Input Label Name (10 characters)
BI_03 :=
DNP Binary Input Label Name (10 characters)
BI_04 :=
DNP Binary Input Label Name (10 characters)
BI_05 :=
DNP Binary Input Label Name (10 characters)
BI_06 :=
DNP Binary Input Label Name (10 characters)
BI_07 :=
DNP Binary Input Label Name (10 characters)
BI_08 :=
DNP Binary Input Label Name (10 characters)
BI_09 :=
DNP Binary Input Label Name (10 characters)
BI_10 :=
DNP Binary Input Label Name (10 characters)
BI_11 :=
DNP Binary Input Label Name (10 characters)
BI_12 :=
DNP Binary Input Label Name (10 characters)
BI_13 :=
DNP Binary Input Label Name (10 characters)
BI_14 :=
DNP Binary Input Label Name (10 characters)
BI_15 :=
DNP Binary Input Label Name (10 characters)
BI_16 :=
DNP Binary Input Label Name (10 characters)
BI_17 :=
DNP Binary Input Label Name (10 characters)
BI_18 :=
DNP Binary Input Label Name (10 characters)
BI_19 :=
DNP Binary Input Label Name (10 characters)
BI_20 :=
DNP Binary Input Label Name (10 characters)
BI_21 :=
DNP Binary Input Label Name (10 characters)
BI_22 :=
DNP Binary Input Label Name (10 characters)
BI_23 :=
DNP Binary Input Label Name (10 characters)
BI_24 :=
DNP Binary Input Label Name (10 characters)
BI_25 :=
DNP Binary Input Label Name (10 characters)
BI_26 :=
DNP Binary Input Label Name (10 characters)
BI_27 :=
DNP Binary Input Label Name (10 characters)
BI_28 :=
DNP Binary Input Label Name (10 characters)
BI_29 :=
DNP Binary Input Label Name (10 characters)
BI_30 :=
DNP Binary Input Label Name (10 characters)
BI_31 :=