Schweitzer Engineering Laboratories SEL-787 - Page 273

Date _______________
Group______________
Date Code 20081022 Instruction Manual SEL-787 Relay
SET.61
of 68
SEL-787 Settings Sheets
DNP3 Map Settings (SET DNP n Command)
Analog Input Map
DNP Analog Input Label Name (24 characters)
AI_00 :=
DNP Analog Input Label Name (24 characters)
AI_01 :=
DNP Analog Input Label Name (24 characters)
AI_02 :=
DNP Analog Input Label Name (24 characters)
AI_03 :=
DNP Analog Input Label Name (24 characters)
AI_04 :=
DNP Analog Input Label Name (24 characters)
AI_05 :=
DNP Analog Input Label Name (24 characters)
AI_06 :=
DNP Analog Input Label Name (24 characters)
AI_07 :=
DNP Analog Input Label Name (24 characters)
AI_08 :=
DNP Analog Input Label Name (24 characters)
AI_09 :=
DNP Analog Input Label Name (24 characters)
AI_10 :=
DNP Analog Input Label Name (24 characters)
AI_11 :=
DNP Analog Input Label Name (24 characters)
AI_12 :=
DNP Analog Input Label Name (24 characters)
AI_13 :=
DNP Analog Input Label Name (24 characters)
AI_14 :=
DNP Analog Input Label Name (24 characters)
AI_15 :=
DNP Analog Input Label Name (24 characters)
AI_16 :=
DNP Analog Input Label Name (24 characters)
AI_17 :=
DNP Analog Input Label Name (24 characters)
AI_18 :=