Date Code 990215 Serial Port Communications and Commands 10-27
SEL-351P Manual Técnico
You may append a setting name to each of the commands to specify the first setting to display
(e.g., SHO 1 E50P displays the setting Group 1 control settings starting with setting E50P). The
default is the first setting.
The SHO commands display only the enabled settings. To display all settings, including
disabled/hidden settings, append an A to the SHO command (e.g., SHO 1 A).
Below are sample SHOWSET commands for the SEL-351P showing all the factory default
settings. Settings groups 1 through 6 have the same settings for SHO n, SHO EZ n, and SHO L
n.
To Next Page
Loading...