Page 9
Art. no.: 2.511407 Rev.: a
Safety notes 1
User guide Maintenance 1.10
CT8000P-2
1.10 Maintenance
1.11 Terms of warranty
Your seca CT8000P-2 is warranted against defects in material and manufacture, as
stated in the Terms and Conditions. Excluded from this warranty is damage resulting
from negligence or improper use. The warranty entitles to free replacement of the
defective part. Any liability for subsequent damage is excluded. The warranty is void
if unauthorised or unqualified persons attempt to make repairs.
In case the device is defective, send it to your local seca representative or directly to
the manufacturer. The manufacturer can only be held responsible for the safety,
reliability and performance of the apparatus if:
• assembly operations, extensions, readjustments, modifications, or repairs are car-
ried out by persons authorized by the manufacturer, and
• the seca device and approved attached equipment is used in accordance with the
manufacturer's instructions, and
• the maintenance intervals as stated in the section Maintenance are observed.
Danger of electric shock. Do not open the device. There are no serviceable parts
inside. Servicing must only be performed by qualified technicians authorised by
seca.
Before cleaning and to isolate the mains power supply, switch the monitor off and
disconnect it from the mains by removing the plug.
Do not use high-temperature sterilisation processes (such as autoclaving). Do
not use e-beam or gamma radiation sterilisation.
Do not use aggressive or abrasive cleaners.
Do not, under any circumstances, immerse the device or cable assemblies in
liquid.
There are no express or implied warranties which extend beyond the warranties
hereinabove set forth. seca makes no warranty of merchantability or fitness for a
particular purpose with respect to the product or parts thereof.
seca assumes no liability for the loss of data saved on the computer or on the device.
The owner is solely responsible for the data backup.
To Next Page
Loading...
