Seca CT8000P-2 - Setting User Name & Password for Access Control

Page 87
Art. no.: 2.511407 Rev.: a
General and System Settings 10
User guide General 10.7
CT8000P-2
10.7.1 Setting user name & password for access control
Automatic log off
(Only displayed when
access control is activat-
ed)
Automatic logout activated
Yes/No
Timeout logout [s]
300
Menu Parameter Description / selection
New
EditSAVE
Clear
Administrator
Function keys to:
• create a new user
• edit an existing user
• save settings
• delete a user
1. Choose the Access control menu.
2. Confirm with OK.
3. Activate Access Control Mode with OK key (blue).
4. Use "left" key to select mode Local.
5. Use “down” key to select user name.
6. Use “right/left” key to select user, if available
7. Select the function key:
– “Edit” to enter a new password or define user rights.
– “”New” to create a new user.
 User rights can be selected or deselected with the "OK"
key. The "System settings" right cannot be disabled for
the administrator.
8. Select the function key “Save”
Access Control Mode
Local
Edit system settings
Analyse recording
Create recording
User name
Password
Retype password
User rights
Access control