Seca CT8000P-2 - General

Page 85
Art. no.: 2.511407 Rev.: a
General and System Settings 10
User guide General 10.7
CT8000P-2
10.7 General
Menu Parameter Description / selection
Info
Various parameters
Software and hardware versions are displayed.
A diagnostic file (.nfo) is written to the connected USB
USB memory stick.
Power management
With battery
Dim backlight [s] 120 seconds (2 min.). If set to 0, this function is deactivated.
Shut down device [s] 600 seconds (5 min.). If set to 0, this function is deactivated.
Connected (to the mains)
Dim backlight [s] 0 seconds (2 min.). If set to 0, this function is deactivated.
Shut down device [s] 3600 seconds (60 min.). If set to 0, this function is deactivated.
Station
Device ID Device identification
Institute Name of the institute
Department Name of the department
Technician
Name of the technician (this name appears automatically as acquiring
technician in the patient data)
Network host name
Set host name for network communication
Standard = at-102g2
Update
Check Schiller Update Server
Update software
The check is performed on the Schiller update server. Therefore, an
Ethernet/WLAN connection is required, including the necessary net-
work settings for this connection
Check USB device for update
file
The Update is performed via the connected USB stick.
Manage licenses
Available options
Automatic interpretation, CCAA, ETM Sport, worklist, basic exercise
ECG
Activate license
Enter the licence key and activate
Import licence from USB
Activation via USB stick (.lic file)
Mandatory fields
Recording types
Rest and rest rhythm; exercise ECG
Selection of mandatory fields
The activated mandatory fields must be filled in before a recording can
be started.
Mandatory fields for exercise ECG that cannot be deactivated:
Gender, Height, Weight, DOB.
Information
Send info to USB