Seca CT8000P-2 - Responsibility of the User; Organisational Measures

1 Safety notes
1.4 Responsibility of the User
Page 6
CT8000P-2
Art. no.: 2.511407 Rev.: a
1.4 Responsibility of the User
1.5 Organisational Measures
 The CT8000P-2 must only be used by qualified physicians or trained medical
personnel.
 The numerical and graphical results and any interpretation given must be
examined with respect to the overall clinical condition of the patient and the
general recorded data quality.
 The responsibilities of the personnel for the operation and maintenance of the
device must be specified.
 Ensure that the personnel have read and understood this user guide, in particular
this section Safety Notes.
 Damaged or missing components must be replaced immediately.
 The safety, reliability and performance of the device can only be guaranteed
when the maintenance intervals as stated in the section Maintenance are
observed.
 Before using the device, ensure that a medical product representative has
explained its functions as well as the safety requirements.
 Keep this user guide in an accessible place for reference purposes. Make sure
that it is always complete and legible.
 Observe the operating and maintenance instructions.
 These operating instructions do not override any statutory or local regulations, or
procedures for the prevention of accidents and environmental protection.