Seca CT8000P-2 - Exercise ECG; General; Ergo Device

10 General and System Settings
10.8 Exercise ECG
Page 88
CT8000P-2
Art. no.: 2.511407 Rev.: a
10.8 Exercise ECG
10.8.1 General
10.8.2 Ergo device
Parameter Description Select
Target HR
Calculation of the target HR based on AHA or WHO
guidelines
AHA or WHO
@J-Point
Point at which the ST measurement is performed.
J+10ms, J+20ms, J+30ms,
J+40ms, J+50ms, J+60ms,
J+70ms, J+80ms, J+90ms
Step timer
Step timer display: remaining or elapsed time Remaining or elapsed.
Show RPE
Display of dialogue to enter the exertion perceived by the
patient
Yes/No
Show manual events
Display of dialogue to enter events during exercise
ECGs
Yes/No
Template
Default report template Yes/No
Parameter Description Select
Ergo device
Select the type Bike or treadmill
Bicycle or treadmill
Select the model
Bicycle:
• ErgoSana
•ErgoLine
• Unsupported
Treadmill:
• MTM-1500 Trackmaster
• MTM-1400 Trackmaster
• Intertrack 8100
• Trackmaster 428
• Unsupported
Bike with NIBP
(
displayed when Bike is select-
ed.)
Select bike with or without NIBP Yes/No
Speed
(
displayed when Treadmill is
selected.)
Setting the speed unit for the treadmill km/h or mph