7 Exercise ECG
7.2 General
Page 56
CT8000P-2
Art. no.: 2.511407 Rev.: a
7.2 General
The CARDIOVIT AT-102 G2 features one interface COM1 (RS-232) to control digital
treadmills and bikes; moreover, it features the following functions:
• Ten pre-programmed treadmill protocols
• Seven pre-programmed bike protocols
• Manually advancing to the next step at any time
• Manually pausing the current step at any time
• Manually entering the BP in a dialogue.
• User-defined ST measurement point
• Printout at the end of each step:
–Step
– Load (bike protocol)
– Speed and slope (treadmill protocol)
– Patient data
– Blood pressure
– ECG segments of all leads
• Printout of the last ten seconds (manual ECG key)
• Final report with the most important data in simple graphs and tables, a tabular
overview on step duration, load/speed and slope, BP, HR as well as space for com-
ments.
During data acquisition, 6 or 12 leads can be displayed. However, the number of dis-
played leads cannot be changed directly in the exercise view and needs to be de-
fined before the exercise mode is defined (see Page 80).
Amplitude and speed for display can be changed during the test using the key
and the function keys mm/s and mm/mV.
To Next Page
Loading...
