Seca CT8000P-2 - Printing, Saving and Transferring Automatically

Page 43
Art. no.: 2.511407 Rev.: a
Resting ECG 5
User guide Resting ECG - Procedural Flow Diagram 5.1
CT8000P-2
5.1.1 Printing, saving and transferring automatically
Menu > Settings > General > Workflow
Activate Print after acquisition, Transmit after acquisition and Delete after
transmission to automatically print and transmit a saved recording or to delete
recordings after transmission.
• The transmission settings are detailed in the section Settings (see Page 81).
• Further ECG settings are described later in this section (see Page 73).
• Printing and transfer from the memory is described in the section Memory (see
Page 61).
• The settings are saved automatically. The settings can be exported (see Page 72).