Seca CT8000P-2 - Menu Reports; General; Manual Printout

Page 75
Art. no.: 2.511407 Rev.: a
General and System Settings 10
User guide Menu Reports 10.3
CT8000P-2
10.3 Menu Reports
Saved ECGs can be displayed with different settings at any time.
10.3.1 General
10.3.2 Manual printout
In this menu, the default settings for manual printouts are defined.
Parameter Description
Rhythm mode
Sequential or Simultaneous. If Sequential is selected, consecutive time segments
are used for the individual lead groups (this applies for printouts). If Simultaneous is
selected, the same time segment is used for all lead groups (this applies for
printouts). If a print format with a rhythm lead is defined, Sequential is used, even if
you have selected Simultaneous.
PDF paper format
A4 or Letter
PDF conformance
None, PDF/A-1a, PDF/A-1b
Company info 1, 2, 3
Enter company information on the PDF, lines 1, 2, and 3.
Parameter Description
Default lead group
Selection of the lead group:
All, extremities or precordials
Default amplitude [mm/mV]
5, 10, 50 mm/mV
Default speed [mm/s]
12.5, 25 or 50 mm/s