Seca CT8000P-2 - Wlan

10 General and System Settings
10.5 Connectivity
Page 82
CT8000P-2
Art. no.: 2.511407 Rev.: a
10.5.3 WLAN
General
Advanced
To select a WLAN network, press the function key “Browse networks”, select your
network and confirm with the OK key. Once all parameters have been set, press the
"Apply" function key .
Menu Parameter Description / selection
WLAN general
Wi-Fi enabled Yes/No
SSID SSID = Enter network name.
Wi-Fi security
Selection of the encryption protocol
• WPA2 Pers
SSID + key + (encryption = AES+ authentication
• WPA2 enterprise / ieee802.1 (further settings see *)
SSID + certificate + (encryption = AES+ authentication)
SSID + user name & password + (encryption = AES+ authentica-
tion)
Password Enter password for Wi-Fi security “WPA / WPA2 Pers”
*For WPA2 enterprise / ieee802.1 the following additional fields are
displayed:
*Authentication protocol
Select the authentication protocol:
• PEAP
• EAP-TLS
• EAP-TTLS
*User Enter user name
*Password Enter password
*Client certificate
Load the certificate via USB stick or network . Download the certif-
icate via USB port of the device when EAP-TLS is selected
 Connect USB stick to the device and press Import certificate from
USB .
Certificate structure: a single file in pem. format contains client
certificate, of origin, private key. The private key may or may not be
encrypted. If it is encrypted, the user name and password need to be
entered.
*CA Certificate
Load CA Certificate (Certificate Authority) via USB stick or
network.
General
Advanced
Network
Apply
Browse networkCertificates from
USB stick..
Certificate from
USB stick...
Certificate from
USB stick...