Seca CT8000P-2 - Connectivity; EMR Integration; Ethernet

Page 81
Art. no.: 2.511407 Rev.: a
General and System Settings 10
User guide Connectivity 10.5
CT8000P-2
10.5 Connectivity
10.5.1 EMR integration
10.5.2 Ethernet
Menu Parameter Description / selection
EMR integration
Server settings
EMR integration
(EMR = electronic medical
record system)
None
– No input field displayed
Schiller Link
– Device ID is displayed
Schiller Server
– Host, port, user and password input fields are displayed. (See fol-
lowing)
Host Name of the server
Port Port address
SSL Certificate Validation Yes/No
User User name
Password Password
Menu Parameter Description / selection
Ethernet
Use DHCP
Yes/No. If this is not activated, the following parameters need to be
entered:
IP address Identifier address of the device in the TCP/IP network.
Subnet mask E.g.: 255.255.255.0
Standard Gateway Gateway IP address.
DNS server Domain name of the server